VDP

1. System introduction
1.  System introduction This document listed the involved firmware and software, and explained the configuration of IP villa solution, including the VTO, V...
Wed, 10 Jul, 2019 at 5:07 PM
2. How to configure: 1 VTO + 1 VTH
2. How to configure: 1 VTO + 1 VTH Note: When you want to connect the devices, please make sure the IP address of VTO and VTH are in the same network segm...
Wed, 10 Jul, 2019 at 5:08 PM
3. How to configure: 1 VTO + m VTH
3     How to configure: 1 VTO + m VTH If there are more than 2 VTHs, you can set group call function of VDP. Maximum support for 5 VTH. 3.1   How to setu...
Wed, 10 Jul, 2019 at 5:09 PM
4. How to configure: n VTO + m VTH
4     How to configure: n VTO + m VTH In IP villa system, it maximum supports 20 VTO and 5 VTH. 4.1   How to setup the main VTO Step 1  Login http://...
Wed, 10 Jul, 2019 at 5:10 PM
5. How to add IPC
5     How to add IPC There are two different ways to add IPC: add IPC at VTO web interface (24ch) or add IPC at VTH (8ch). If you add IPC at VTO web interf...
Wed, 10 Jul, 2019 at 5:12 PM
6. How to configure: snapshot, video & audio message and record
6     How to configure: snapshot, video & audio message and record All the three functions need a micro SD card (max to 32GB) inserted in VTH. When yo...
Wed, 10 Jul, 2019 at 5:13 PM
7. How to configure: VTH alarm
7     How to configure: VTH alarm VTH1550CH supports 6ch alarm in & 1 alarm out. 7.1   Wiring instructions 7.2   How to setup alarm zone Step 1 ...
Wed, 10 Jul, 2019 at 5:15 PM
8. How to setup VTH DND mode
8     How to setup VTH DND mode During a certain period, if you do not want to be disturbed, you can go to Setting>DND to enable DND function. By defau...
Wed, 10 Jul, 2019 at 5:16 PM
9. How to configure: SmartPSS
9     How to configure: SmartPSS 9.1   How to register to the platform Step 1  VTO web interface- > System Config - >LAN Config, input MGT center ...
Wed, 10 Jul, 2019 at 5:19 PM
10. How to configure: mobile App DMSS
10   How to configure: mobile App DMSS 10.1 How to configure: DMSS Step 1  Make sure the VTO is connected to the public network. Step 2  Login VTO web i...
Wed, 10 Jul, 2019 at 5:20 PM