FAQ

How to Setup RAID
1. Login to your NVR from the web interface. 2. Go to Setup->Storage->RAID Confirm that all installed hard drives are present. 3. Check each o...
Wed, 3 Jul, 2019 at 4:24 PM
How to Connect IP Camera to HCVR and XVR
How To Change Channel Type Click on the "Setup Tab" ➞ Camera ➞ Channel Type ➞ Select which Channels are Coaxial, UTP or IP ➞ Click "Save"...
Wed, 3 Jul, 2019 at 4:25 PM
How to Change Between HDCVI, Analog, and IP
1. From the main menu, select Camera. 2. Select Channel Type. 3. Check off which channels are to be Coaxial, UTP and IP. Note: you can make one any...
Wed, 3 Jul, 2019 at 4:26 PM