【1】Product Model(Version)

      This method is suitable for all of NVR.

【2】Description of the problem

Tour can be used to take turns previewing device recordings with limited window splitting,and specify the playback key monitoring scene after the model generates an alarm.

Tour can be divided into three modes:

(1)Video Detection Tour

(2)Alarm Tour

(3)Tour

Priority: Alarm Tour>Video Detection Tour>Tour

【3】Problem Processing and Root Cause

None

【4】Solution

【1】Video Detection Tour Setting

(1)Select the front-end model and select the function that requires Tour.Tour can be set for all IVS and Video Detection.

a、Motion Detection Tour

b、 Tripwire Tour

(2)Configure the Tour combination(View1 or View8),Setting path:system_display_Tour_Video Detection

(3)Set the model camera channel number of the Tour group, the group can be added or deleted, and the channels can be combined in any combination.

(4)After the setup is complete, click Apply - OK

【2】Alarm Tour

 (1)Open Tour in the alarm interface

(2)Configure the Tour combination(View1 or View8),Setting path:system_display_Tour_Alarm

(3)Set the model camera channel number of the Tour group, the group can be added or deleted, and the channels can be combined in any combination.

(4)After the setup is complete, click Apply - OK

【3】Tour

(1)Open Tour in the tour interface

(2)Set the model camera channel number of the Tour group, the group can be added or deleted, and the channels can be combined in any combination.

(3)After the setup is complete, click Apply - OK


THE END

(Remarks:Demo model DHI-NVR5216-8P-I ; Firmware DH_NVR5XXX-I_MultiLang_V3.215.0000010.0.R.20181016)