4     How to configure: n VTO + m VTH

  • In IP villa system, it maximum supports 20 VTO and 5 VTH.

4.1   How to setup the main VTO

Step 1  Login http://192.168.1.110 , System Config -> LAN Config, setup main VTH’s Building number, Building Unit number and VTO number. Make sure to tick the ‘Group Call’ box, and click OK to save.

Step 2  System Config -> Indoor Manager, click on ‘Add’. You need to input room number of VTH in the ‘VTH Short No’ box, such as 101.

Step 3  Reboot the device.

4.2   How to setup the Sub VTO

Step 1  Login http://192.168.1.111 , System Config -> LAN Config, setup main VTH’s Building number, Building Unit number and VTO number. Make sure to tick the ‘Group Call’ box, and click OK to save.

Note: Building number and unit number of main and sub VTO must be the same; VTO number must be different. VTO number format is ‘69XX’, range 6901~6999.

Step 2  System Config -> Indoor Manager, click on ‘Add’. You need to input room number of VTH in the ‘VTH Short No’ box, such as 101.

Step 3  Reboot the device.

4.3   How to setup the master VTH and extension VTH

Step 1  Master VTH add main VTO. Set room number as 101. Add VTO2000A in ‘VTO Config’ and enable it.

Step 2  Master VTH add sub VTO. Press the  icon to switch to sub VTO configuration. Add sub VTO as the same and enable it.

Step 3  Extension VTH add VTO. Setup the VTH as extension VTH and the configuration will synchronize automatically from master VTH. You need to enable it.

4.4   Check result

Call from main VTO:

Call from sub VTO: