How to create a video wall plan

Function introduction:

For control central, customers always use Video wall to watch video.

Step by Step Instructions:

Part1.Creat video wall

Step1. Add a decoder or Matrix first. Take Matrix as an example.

1) Login to the Web manager.

2) Select Device option in new tab.

3) Click Add to add new device.

4) Choose Matrix from the drop down box of Device Category, enter IP address, device port, user, password and etc. Click Add to continue.

5) Enter device name, video channel and etc. Select device mode, click OK.

6) The matrix will be displayed on the device list, and if your network is normal, the status is displayed online.


Step2.Add a TV wall.

1) Select Video Wall option in new tab. Click “Add Video Wall”

2) Set “Video Wall Name”

Select window layout. “M*N” means the customized rows and columns.

If you need to combine the screens. Select the screens to be combined. (Hold the CTRL key to select multiple targets.)

Click  to combine. Then the screens became one splicing screen.

Click  to cancel the splicing screen or click  to clean all the screens.

Click Select Channel to continue.

Step3. Bind the encoder channel to the screens.
1) Click on the lower left corner to show the screen ID to check the connection to help us bind the right slot to the screens.

2) In device tree, select decoder to bind, and drag it to corresponding video wall

3) Click “Done”.

Step4.The video wall you have created list here.

      Click to enable or disable the video wall.

      Click  to modify the video wall.

      Click  to delete the video wall.

 

Part2. Execution of video wall

Step1. Login to DSS client, select “Video Wall” module

Step2. Select the channel to display on video wall.

1) Select the Video wall name in dropdown list.

2) Click the screen, then select the video source from the left device list and drag it to the window of the video wall.

3) Open the Auto Apply, this channels will auto outputs video to video wall.


Part3.Video wall plan (Schedule/Tour)

Step1.Create the task.

1) After combining the video channels, we should save the task.

2) Click to save the current video wall as a new task. Enter the task name. Click OK to save the task.

3) You can click “Detail” to see detail channel information and do some operation, including Live View, Up, Down, Delete.

Open the Auto Apply, when you finish task setup, it auto outputs task video to wall.

For Schedule plan:

Step2. Create a new schedule plan.

1) Click on the top right of TV wall interface.

2) Pitch on “Schedule” when your mouse move to the mini window.

Step3. Set the schedule plan info.

1) Input the plan name.

2) Select the task, set the start time and end time. Click  (Supports adding multiple periods).

3) Enable the remaining time plan. Click “save” to finish the plan.

Step4.Click to enable the schedule plan.

For Tour plan:

Step2. Create a new tour plan.

1) Click on the top right of TV wall interface.

2) Pitch on “Tour” when your mouse move to the mini window.

Step3. Set the tour plan info.

1) Input the plan name.

2) Select the task, set the stay time. Click to add task.

3) Click  to adjust the turn of the different tasks. Click “save” to finish the plan.

Step4.Click to enable the schedule plan.

The schedule plan and the tour plan can only execute one plan at a time.