How to add an IP camera?
- Dahua NVR running the latest firmware.
- A display connected to the Dahua recorder.
Step by Step Instruction
1. Via IP address
Here you can only see the registration interface, all the NVR support ONVIF standard protocol.
(1)The devices connected by network is shown
(2)Click “Add” to add the remote device.
2. Via POE port
(1) If IPC supports POE(power on Ethernet), it can connect NVR with the POE ports in the back panel of NVR. IPC doesn’t need to use additional power supply.
(2) Just connect the IPC to POE ports o NVR via network cable, the IP address will be changed by NVR automatically.